Page 52
Signals Listed By Channels
HI/VI-N Phoenix Connector Pins (+, -, shield)
Signals Listed By Connector Pins
Visually Impaired – Narrative-
Visually Impaired – Narrative+
Parallel Automation Interface
Pins 1 through 7 of the DB25F automation connector are “control” pins that accept contact closure or open
collector pulses to ground to select formats. Pulsing pin 8 low toggles the mute state. Pins 9 and 10 are used for
remote fader operation. Each input sources a 400uA when grounded. A pin needs to be pulled below 2.6V for
50ms or more for the JSD-60 to recognize it as low. On pin 13, a +5V, 100mA supply is available to power the JSDV-
80 Remote Fader. An automation return is on Pin 12.
Comments to this Manuals