Usl JSD-60 Manual User Manual

JSD-60 Manual Cinema Processor USL, Inc. 181 Bonetti Drive San Luis Obispo, CA 93401-7397 USA Phone: +1 805 549 0161 Fa

Page 10 A user configurable mixer routes audio as required for the specific auditorium. Supported auditorium configurations include 5.1

Page 11 channels). The COAX and TOSLINK sources can have the either a two channel mix or six channel decode. The optional DI-84 board is required to

Page 12 In most installations, the user merely loads crossover settings from the supplied speaker library, and then adjusts the output trims as requ

Page 13 6. Specifications Features A processor specially designed for Digital Cinema applications. Low noise and low distortion processing ensur

Page 14  Hearing Impaired and Visually Impaired - Narrative – pluggable Phoenix connector.  COAX – RCA jack with transformer input  TOSLINK –

Page 15  Connect the supplied 12 VDC bypass power supply to the bypass power input on the rear panel of the JSD-60 and plug it in to the AC line.

Page 16 15. Public Address and Real Time Analyzer microphone phantom power supply selector, 12V balanced, 9V unbalanced, and off. 16.

Page 17 loop noise. The cable should be twisted pair with individual shields, even when driven by an unbalanced source. The DB25F connector uses

Page 18 a per-format basis. The VI-N audio output is typically driven by AES/EBU input 8. The HI audio output can be driven from AES/EBU input 7 or

Page 19  The Microphone Library holds calibration data on microphones used on the RTA. A separate file can be created for each microphone used wi

Page 2 One-Year Limited Warranty USL, Inc. warrants that each product manufactured by it will be free from defects in material and workmanship un

Page 20  In the “Troubleshoot” screen select the “Advanced Options” item.  Next on the “Advanced Options” screen, select “Startup Settings.” On

Page 21 The top control allows the user to navigate back to the Overview or another Screen. In the unit view, there’s a common tool bar ribbon

Page 22 connected to the JSD-60, all the settings in that configuration file are sent to the JSD-60. When you connect to a JSD-60, all the configur

Page 23 USB Select this tab to connect to the JSD-60 using USB. When the host computer is connected to the JSD-60 USB port, the JSD-60 should be li

Page 24 5.1LsCL RRs7.1SDDSLc Rc7.1DSLrs RrsLFECL RLFECL RLFELs RsLs RsNew Name (abbreviation) Description Previous Name (abbreviation) Right rear su

Page 25 The drive in channel configuration setting is used for outdoor theaters that are equipped with a stereo FM transmitter and field speakers fo

Page 26 Headroom The headroom setting adjusts the system gain so the nominal level is a specified number of dB below the digital clipping level (0 d

Page 27 8.10.1 Summary Tab The “Summary” tab (shown above) gives an overview of the JSD-60. The Theater Information fields may be

Page 28 8.10.2 Formats Tab The “Formats” tab allows the setting of “Per-Format” configuration. These settings apply only to a specific format. Th

Page 29 8.10.3 Equalizer Tab The JSD-60 equalizer allows the frequency response of the JSD-60 to be adjusted for the acoustics of the room. The RTA

Page 3 Table of Contents 1. Safety Notice 5 2. Legal Notices 5 3. Regulartory Compliance

Page 30 serial number. The RTA gain setting required for the proper SPL indication is saved. See Appendix E for information on the micropho

Page 31 Filters Tab The channel filter settings are available in the filters tab. A filter response plot is displayed and updated when the settings

Page 32 Crossovers The Crossover Tab is used to configure crossovers and other outputs where a single channel drives multiple band outputs (see sec

Page 33 filter plot of the LFE channel includes the effect of the 125Hz low pass filter specified for the LFE channel in SMPTE EG0432-2-2006. In thi

Page 34 Surround Delay Using Meters With Length and Width of the auditorium in meters, the surround delay, in ms, should be (L/3)-(W/6)+20. Surroun

Page 35 US Time Zone UTC Offset Standard Time Abbreviation Daylight Saving Time Abbreviation Hawaii-Aleutian -10:00 HAST HADT Alaska -9:00 AKST AKDT

Page 36 Input Name The name that is shown on the display and logged when a particular format is selected can be set by the user. Type a meaningf

Page 37 an LCR mix or delivered by AES/EBU channel 7. Since not all content (especially trailers) has HI on AES/EBU channel 7 and that channel is us

Page 38 The JSD-60 holds a log of the last 15,000 events. Events include level changes, format changes, remote connections by the GUI or other dev

Page 39 noise generator, then disable it. Enabling the internal pink noise generator configures the internal RTA for proper operation. 1. Ensure t

Page 4 8.11.54 Manual Equalization 40 9. System Operation 42 9.1 Front Panel 42 9.2 Automation 43 9.3 System Monitorin

Page 40 a. On the equalizer tab, select the center channel. b. Set the gain control at the far left of the equalizer to minimum. c. Set the main

Page 41 11. Adjust the Bass and Treble controls to provide the required low and high frequency response. 12. Adjust the remaining equalizer contro

Page 42 9. System Operation The JSD-60 is controlled by the digital cinema server in most installations. Control is also available from the fron

Page 43 speaker configuration. When the speaker configuration includes use of the JSD-60 internal crossovers, the bar graph shows the low band in ye

Page 44 Adding Auditoriums In the Overview, the “Auditoriums” button will display the management screen. This allows the user to either manually ad

Page 45 network information. It also has buttons to select input format, adjust fader level, and mute or unmute the system. The log page shows the

Page 46 The Update Firmware page allows the firmware running on the main PIC, front panel PIC, digital signal processor. To be updated, the usernam

Page 47 Appendix A – Connector Pin Outs Connector Pin Outs For convenience, all connector pin outs are located in this appendix. DB25F AES/EBU Inp

Page 48 RJ-45 AES/EBU Input The JSD-60 uses the StudioHub pin out for AES/EBU over CAT5 or CAT6 Ethernet cable. These cables are

Page 49 Signals Listed By Connector Pins DB25F Pin Signal Name Channel Name 1 GND 2 L+ Left+ 3 4 GND 5 C+ Center+ 6 7 GND 8 R+ Right+ 9 GN

Page 5 1. Safety Notice Safety Notices Review the following safety precautions to avoid injury and prevent damage to this product. To avoid p

Page 50 When the channel configuration is “Drive In,” the outputs and their use are listed in the following table. Audio Channels Drive In Audio

Page 51 Signals Listed By Channels Audio Channel DB25M Crossover Output Pins (+, -, shield) Left High 2, 14, 1 Center High 5, 17, 4 Right High 8, 2

Page 52 Signals Listed By Channels Audio Channel HI/VI-N Phoenix Connector Pins (+, -, shield) HI 1, 2, 3 VI-N 4, 5, 3 Signals Listed By Connect

Page 53 24 25 RS-232 Interface The RS-232 interface appears on a DE9F connector on the rear panel. The connector is wired as a DCE device. A c

Page 54 Command Response Description Jsd60.sys.fader\t700\r or jsd100.sys.fader\t700\r 700 Sets or reads the current fader level. If a parame

Page 55 Appendix C – System Restore and Power-Up Buttons System Restore The JSD-60 has several methods of recovering from an unlikely failure. Thes

Page 56 Appendix D – JSD-60 Accessories AES/EBU RJ45 Adapters for various servers The JSD-60 can use CAT5 cable with RJ45 connectors to carry AES/E

Page 57 Appendix E – INI File Formats Many configuration files used by the JSD-60 GUI are plain text ini files. They are located in Documents\USL\J

Page 58 # count for the number of passes. With each pass the EQ's are updated. # With each pass, after a number of passes, the amount of chang

Page 59 Band10000=1 Band12500=1 Band16000=1 Treble=1 # The bass and treble are a shelving filter that are adjusted prior to # the individual equali

Page 6 Le Résumé de la Sécurité general Européen Examinez les précautions de la sécurité suivantes éviter la blessure et prévenir le dég

Page 60 [Band125Hz] Value=0 Max=3 Min=-3 [Band160Hz] Value=0 Max=3 Min=-3 [Band200Hz] Value=0 Max=3 Min=-3 [Band250Hz] Value=0 Max=3 Min=-3 [Band315

Page 61 Value=-1 Max=2 Min=-4 [Band3.15kHz] Value=-2 Max=1 Min=-5 [Band4kHz] Value=-2.5 Max=0.5 Min=-5.5 [Band5kHz] Value=-3.5 Max=-0.5 Min=-6.5 [Ba

Page 62 MicGain=0.0 Offset=10.0 # The Microphone frequency response is used to offset the RTA data being # reported from the JSD-60. The RTA displ

Page 63 PEQ1Gain=0.0 PEQ2Freq=800 PEQ2Q=1.0 PEQ2Gain=0.0 [High Band] HPFreq=800 Gain=-9.0 Delay=0.0 PEQ1Freq=4000 PEQ1Q=1.0 PEQ1Gain=0.0 PEQ2F

Page 64 jsd60.sys.input_mix 0 7 0 0 0 0 50 50 0 0 jsd60.sys.input_mix 0 8 25 25 50 0 0 0 0 0 jsd60.sys.input_mix 0 9 25 25

Page 65 Additional JSD-60 Manuals may be viewed / downloaded at: www.uslinc.com

Page 66 JSD-60L and JSD-60D rear view JSD-60LX and JSD-60DX rear view V130614

Page 7  Benutzen Sie eine Korrekt geerdet Macht-Quelle. Der Macht Versorgung Erde Boden wird durch den Boden-Schaffner im Macht-Kabel gegründet

Page 8  EN 61000-3-3: 1995 +A1: 2001 & A2: 2005 Voltage Fluctuation and Flicker FCC Part 15, Subpart B This equipment has been tested and fou

Page 9 5. System Overview 5.1 System Description The JSD-60 cinema sound processor is specially designed for digital cinema a