Usl JSD-100 Installation Manual download pdf (Page 27)

SX-2000 Installation Manual

11/8/2010

GDC Technology Ltd. Page 26 of 42

3.1.4 Time Zone Setup

The SX-2000 server may or may not arrive with the local time zone set. The following steps show

how to change the time zone on the server.

1. Click the power button once to access the Control Panel.

2. Click [Admin Panel] to access the Admin Panel.

3. Click [Focus] at the far bottom right of the keyboard, then click the cursor in the

“Password” text box to enter the password.

4. Click [Diagnostics/Maintenance]->[Configure Timezone] to access the Time zone

Selection Page (see Figure 40)

Figure 30 Timezone configuration

5. Click [Focus] and tap the section above the keypad to bring the pointer into focus.

6. Use [↑] and [↓] to highlight the desired timezone.

7. Click [Tab] until the [OK] button is highlighted and click [Return] to set the timezone (Do

not change the “System clock uses UTC” setting).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

No comments

Usl JSD-100 Installation Manual Page 27