Usl JSD-100 User Manual download pdf (Page 15)

INTEG Process Group, Inc.

JNIOR

A Network I/O Resource 15

Cinema.JNIOR Application Manual

Action – User selectable action to take when this Action is executed. There are a variety

of types of actions based upon the device to be controlled:

JNIOR I/O

Outputs – Open, Close, Toggle and Pulse (pulse duration is 1 second by default)

Inputs – “Soft Pulse” – the JNIOR creates the input ‘high’ (or ‘on’) message

without any electrical signal wired to the input. The JNIOR will send out the

message packet indicating the input has gone ‘high’ for external devices, such as a

Cinema Server, monitoring the JNIOR to use the input signal as a trigger.

JNIOR Control Panel

LEDs – the 12 LEDs on the JNIOR Control Panel are controlled via the macros.

The LEDs can be set to On, Off, Flash Slow, Flash Medium and Flash Fast

Sounds – the speaker on the JNIOR Control Panel can play various sounds

including Play Sound, Soft Alarm, Medium Alarm, Loud Alarm, Custom Alarm

and Silence Alarm

Clients

Preshow Client – action can be added to send text to the Preshow Client

Cinema Server Client – action can be added to send text to the Cinema Server

Devices

The currently available devices that can be utilized with Cinema.JNIOR are listed

in Appendix E. The RAW Ethernet and RAW Serial devices give you the ultimate

in flexibility to integrate devices regardless of whether they are built into

Cinema.JNIOR or not. For the RAW Ethernet or RAW Serial devices, the only

action available is a Send command. This will send the information entered in the

Data column to the device.

Data – Defines the pulse duration or other data to be sent to the devices listed above.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

No comments

Usl JSD-100 User Manual Page 15